Perkins珀金斯900 3.152柴油發動機提升泵U635848G供應商，Perkins珀金斯900 3.152柴油發動機提升泵U635848G技術價格規格咨詢服務，Perkins珀金斯900 3.152柴油發動機提升泵U635848G零配件供應，Perkins珀金斯900 3.152柴油發動機提升泵U635848G售后服務中心，Perkins珀金斯900 3.152柴油發動機提升泵U635848G，Perkins珀金斯900 3.152柴油發動機提升泵U635848G詳細的技術參數，
首頁
產品展示>Perkins珀金斯900 3.152柴油發動機提升泵U635848G
產品中心
美國強鹿柴油機維修配件技術中心
約翰迪爾John Deere柴油機配件 美國麥克福斯
卡特彼勒柴油發動機參數
沃爾沃發動機全系參數
英國珀金斯原廠配件
珀金斯柴油機技術中心
珀金斯發動機零件查詢圖冊
日本三菱柴油機發電機配件
德國道依茨 韓國大宇柴油發動機配件
康明斯全系列柴油發動機
沃爾沃 MTU 原廠配件銷售中心
瑞典沃爾沃遍達原裝柴油機配件
康明斯維修技術中心
卡特彼勒柴油發動機原廠配件銷售中心
品牌柴油發電機組
康明斯柴油發動機配件中心
Perkins珀金斯900 3.152柴油發動機提升泵U635848G
詳細描述
項目 零配件號碼 最新件號 描述
2 1 彈簧
3 26410009 1 ULPR0003 修補總成 - 提升泵 U635848G
Valve springs
To change the valve springs (with cylinder head fitted) Operation 3-8
Special requirements
Note: Steps 1 to 12 refer to a change of valve springs for a single cylinder.
Warning! Wear eye protection during this operation.
1 Remove the rocker cover, see Operation 3-1.
2 Rotate the crankshaft in the normal direction of rotation until the inlet valve of the relevant cylinder has just
opened and the exhaust valve has not fully closed. In this position the piston will be at approximately top dead
centre (TDC).
3 Remove the rocker assembly, see Operation 3-3.
4 Fit the valve spring compressor (A1) and the relevant adaptor (A2 or A3).
5 Compress the valve spring and remove the collets. Ensure that the valve spring is compressed squarely or
damage to the valve stem can occur.
Caution: Do not rotate the crankshaft while the valve springs are removed.
6 Release the valve spring compressor and remove the valve spring caps and valve spring.
Caution: The outer diameter of the exhaust valve guide is 1 mm larger than the inlet valve guide. To prevent
leakage past the inlet valve stem it is important that the larger exhaust valve seal is not fitted onto the inlet
guide. The seals have a colour code for identification.
7 Fit new valve stem seals on the valve guides. Ensure that the brown seal is fitted to the exhaust valve and
the green seal is fitted to the inlet valves.
8 Put the new valve springs in position.
Continued
Special tools
Description Part number Description Part number
Valve spring compressor 21825666
Setscrew adaptor used with 21825666 21825932
Stud adaptor used with 21825666 21825931
1
3
2
A A0051
3
Workshop Manual, TPD 1350E, Issue 4 49